BC Class 2 Practice Test · Question
Scenario 11: On a typical air-brake bus, the governor 'cut-in' pressure is approximately:
Compressor begins recharging at about 80–85 psi (cut-out around 120–135 psi). The correct answer is "80–85 psi". This capacity-fill scenario 11 reinforces the s
Start free practice for BC Class 2 Practice Test
50 questions · no signup required · 40 free questions per day
Question: Scenario 11: On a typical air-brake bus, the governor 'cut-in' pressure is approximately:
Answer options:
- 40 psi
- 55 psi ✅ 80–85 psi
- 150 psi
Correct answer: 80–85 psi
Explanation: Compressor begins recharging at about 80–85 psi (cut-out around 120–135 psi). The correct answer is "80–85 psi". This capacity-fill scenario 11 reinforces the same competency for the class2 bank and follows the certified explanation standard.
Start free practice for BC Class 2 Practice Test
50 questions · no signup required · 40 free questions per day
More about BC Class 2 Practice Test
Related Questions
- In a bus equipped with air brakes, the parking brake is typically:
- The 'low air pressure warning' on a bus must activate before pressure drops below:
- The low-air-pressure warning device must activate before pressure drops below:
- Smith System's first key 'Aim High in Steering' means:
- Spring (parking) brakes on an air-brake bus apply automatically when pressure falls to approximately:
- A Class 2 licence in Canada allows you to drive:
More for BC Class 2 Practice Test candidates
Practice tests
Question explanations
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free BC Class 2 Practice Test Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.