Skip to main content

Crane Operator Certification Exam Prep · Question

A rigger is using a wire rope sling that has a rated capacity of 10,000 kg in a straight pull. If this sling is bent around a sharp edge with a D/d ratio of 1, where D is the diameter of the object around which the sling is bent and d is the diameter of the wire rope, what is the approximate derated capacity?

When a wire rope sling is bent around a sharp corner or an object with a D/d ratio of 1, its capacity is derated by approximately 50%. This is due to the severe

Start free practice for Crane Operator Certification Exam Prep

404 questions · no signup required · 40 free questions per day

Start Practice →

Question: A rigger is using a wire rope sling that has a rated capacity of 10,000 kg in a straight pull. If this sling is bent around a sharp edge with a D/d ratio of 1, where D is the diameter of the object around which the sling is bent and d is the diameter of the wire rope, what is the approximate derated capacity?

Answer options: ✅ 5,000 kg

  • 6,000 kg
  • 8,000 kg
  • 10,000 kg

Correct answer: 5,000 kg

Explanation: When a wire rope sling is bent around a sharp corner or an object with a D/d ratio of 1, its capacity is derated by approximately 50%. This is due to the severe localized stress and bending fatigue induced in the wires. So, 10,000 kg * 0.5 = 5,000 kg. Distractor B is incorrect as a D/d ratio of 2 or 3 typically results in a 40% reduction, not 50%.

Start free practice for Crane Operator Certification Exam Prep

404 questions · no signup required · 40 free questions per day

Start Practice →

More about Crane Operator Certification Exam Prep

Related Questions

More for Crane Operator Certification Exam Prep candidates

Ready to practice?

Free, no signup required. Build a wrong-question list as you go.

Start Free Crane Operator Certification Exam Prep Practice →

Related courses

Other Canadian certifications candidates often prepare for alongside this one.