Crane Operator Certification Exam Prep · Question
During a daily pre-shift inspection, an operator notices that the oil level in the main hydraulic reservoir is below the 'add' mark. What is the correct procedure, as per good practice and OEM guidelines?
Maintaining correct fluid levels is critical for crane operation. The operator should add the correct hydraulic fluid as per the OEM manual and record this acti
Start free practice for Crane Operator Certification Exam Prep
404 questions · no signup required · 40 free questions per day
Question: During a daily pre-shift inspection, an operator notices that the oil level in the main hydraulic reservoir is below the 'add' mark. What is the correct procedure, as per good practice and OEM guidelines?
Answer options: ✅ Add the correct type of hydraulic fluid, then document the top-up in the daily log.
- Operate the crane for a short period to see if the level normalizes, then check again.
- Notify the supervisor, but continue operations with reduced load to avoid downtime.
- Drain the entire system and refill with new fluid immediately.
Correct answer: Add the correct type of hydraulic fluid, then document the top-up in the daily log.
Explanation: Maintaining correct fluid levels is critical for crane operation. The operator should add the correct hydraulic fluid as per the OEM manual and record this action in the daily log, ensuring proper system function, as part of the daily inspection outlined in CSA Z150-16, Clause 5.2.1.
Start free practice for Crane Operator Certification Exam Prep
404 questions · no signup required · 40 free questions per day
More about Crane Operator Certification Exam Prep
Related Questions
- According to most Canadian provincial regulations, who is ultimately responsible for the safe operation of a c
- A crane's rated capacity decreases as the load radius:
- What is the minimum number of full wraps of wire rope that must remain on a hoist drum when the hook is in its
- Before setting up a mobile crane, what is the most important factor to assess regarding ground conditions?
- What is the purpose of an anti-two-block device on a crane?
- Why is it important to keep the load as close to the ground as possible when moving it with a crane?
More for Crane Operator Certification Exam Prep candidates
Question explanations
- According to most Canadian provincial regulations, who is ultimately responsible for the safe operation of a c
- A crane's rated capacity decreases as the load radius:
- What is the minimum number of full wraps of wire rope that must remain on a hoist drum when the hook is in its
- Before setting up a mobile crane, what is the most important factor to assess regarding ground conditions?
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Crane Operator Certification Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.