Crane Operator Certification Exam Prep · Question
During a daily pre-operational inspection of a tower crane, the operator discovers that the anemometer is not functioning. What is the correct procedure, as per CSA Z248, regarding crane operation?
CSA Z248 (Code for Tower Cranes) mandates that all safety devices, including an anemometer, must be in proper working order before commencing operations. A non-
Start free practice for Crane Operator Certification Exam Prep
404 questions · no signup required · 40 free questions per day
Question: During a daily pre-operational inspection of a tower crane, the operator discovers that the anemometer is not functioning. What is the correct procedure, as per CSA Z248, regarding crane operation?
Answer options:
- The crane can operate normally as long as the operator estimates wind speed visually. ✅ The crane must be immediately taken out of service until the anemometer is repaired or replaced.
- The crane can operate for a maximum of 4 hours, after which it must be idled.
- The operator can use a handheld anemometer as a temporary substitute.
Correct answer: The crane must be immediately taken out of service until the anemometer is repaired or replaced.
Explanation: CSA Z248 (Code for Tower Cranes) mandates that all safety devices, including an anemometer, must be in proper working order before commencing operations. A non-functioning anemometer is a critical safety defect that requires the crane to be taken out of service.
Start free practice for Crane Operator Certification Exam Prep
404 questions · no signup required · 40 free questions per day
More about Crane Operator Certification Exam Prep
Related Questions
- According to most Canadian provincial regulations, who is ultimately responsible for the safe operation of a c
- A crane's rated capacity decreases as the load radius:
- What is the minimum number of full wraps of wire rope that must remain on a hoist drum when the hook is in its
- Before setting up a mobile crane, what is the most important factor to assess regarding ground conditions?
- What is the purpose of an anti-two-block device on a crane?
- Why is it important to keep the load as close to the ground as possible when moving it with a crane?
More for Crane Operator Certification Exam Prep candidates
Question explanations
- According to most Canadian provincial regulations, who is ultimately responsible for the safe operation of a c
- A crane's rated capacity decreases as the load radius:
- What is the minimum number of full wraps of wire rope that must remain on a hoist drum when the hook is in its
- Before setting up a mobile crane, what is the most important factor to assess regarding ground conditions?
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Crane Operator Certification Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.