Excavator Operator Certification Exam Prep · Question
You are preparing an excavator for operation on a sloped work site in Alberta. As part of your daily inspection, how should you confirm the track tension is within specifications?
Proper track tension measurement is a precise task, usually involving measuring the sag at a specific point on the track chain as outlined in the excavator's op
Start free practice for Excavator Operator Certification Exam Prep
263 questions · no signup required · 40 free questions per day
Question: You are preparing an excavator for operation on a sloped work site in Alberta. As part of your daily inspection, how should you confirm the track tension is within specifications?
Answer options:
- Visually inspect the tracks for sagging or tightness. ✅ Measure the sag of the track chain at the centre idler with a tape measure according to the manufacturer's manual.
- Operate the machine briefly and listen for unusual noises from the tracks.
- Press down on the track with your boot; if it moves easily, it's too loose.
Correct answer: Measure the sag of the track chain at the centre idler with a tape measure according to the manufacturer's manual.
Explanation: Proper track tension measurement is a precise task, usually involving measuring the sag at a specific point on the track chain as outlined in the excavator's operator manual. This ensures optimal performance and prevents premature wear or de-tracking, as per manufacturer specifications and good practice.
Start free practice for Excavator Operator Certification Exam Prep
263 questions · no signup required · 40 free questions per day
More about Excavator Operator Certification Exam Prep
Related Questions
- During a final inspection of an excavator, prior to beginning work, an operator notices significant play in th
- An excavator operator is preparing to dig a trench in cohesive soil. To achieve maximum breakout force, what a
- Which control typically governs the arm (or dipper arm) movement for an excavator?
- What condition might require sloping or shoring of a trench less than 1.2 meters (4 feet) deep?
- According to IUOE best practices, what is the LAST thing an operator should do before leaving the excavator's
- Travel on slope — bucket should be:
More for Excavator Operator Certification Exam Prep candidates
Question explanations
- During a final inspection of an excavator, prior to beginning work, an operator notices significant play in th
- An excavator operator is preparing to dig a trench in cohesive soil. To achieve maximum breakout force, what a
- Which control typically governs the arm (or dipper arm) movement for an excavator?
- What condition might require sloping or shoring of a trench less than 1.2 meters (4 feet) deep?
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Excavator Operator Certification Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.