Skip to main content

Excavator Operator Certification Exam Prep · Question

After performing the recommended hydraulic oil check, you find the level is slightly below the 'ADD' mark on the sight gauge. The manual states the reservoir capacity is 250 litres. Approximately how much hydraulic oil should you add to bring it to the 'FULL' mark, assuming the 'ADD' to 'FULL' range represents 5% of the total capacity?

If the 'ADD' to 'FULL' range represents 5% of the 250-litre reservoir capacity, then 5% of 250 L is (0.05 * 250 L) = 12.5 L. This amount ensures the hydraulic s

Start free practice for Excavator Operator Certification Exam Prep

263 questions · no signup required · 40 free questions per day

Start Practice →

Question: After performing the recommended hydraulic oil check, you find the level is slightly below the 'ADD' mark on the sight gauge. The manual states the reservoir capacity is 250 litres. Approximately how much hydraulic oil should you add to bring it to the 'FULL' mark, assuming the 'ADD' to 'FULL' range represents 5% of the total capacity?

Answer options:

  • Approximately 5 litres. ✅ Approximately 12.5 litres.
  • Approximately 25 litres.
  • Approximately 2.5 litres.

Correct answer: Approximately 12.5 litres.

Explanation: If the 'ADD' to 'FULL' range represents 5% of the 250-litre reservoir capacity, then 5% of 250 L is (0.05 * 250 L) = 12.5 L. This amount ensures the hydraulic system is adequately filled for optimal performance and prevents cavitation.

Start free practice for Excavator Operator Certification Exam Prep

263 questions · no signup required · 40 free questions per day

Start Practice →

More about Excavator Operator Certification Exam Prep

Related Questions

More for Excavator Operator Certification Exam Prep candidates

Ready to practice?

Free, no signup required. Build a wrong-question list as you go.

Start Free Excavator Operator Certification Exam Prep Practice →

Related courses

Other Canadian certifications candidates often prepare for alongside this one.