Forklift Operator Exam Prep · Question
How is the 'load center' defined on a forklift capacity plate?
The load center is the horizontal distance from the vertical face of the forks (the backrest) to the center of gravity of the load. Standard ratings are usually
Start free practice for Forklift Operator Exam Prep
401 questions · no signup required · 40 free questions per day
Question: How is the 'load center' defined on a forklift capacity plate?
Answer options:
- The distance from the floor to the top of the load
- The total weight of the load divided by the fork length ✅ The horizontal distance from the front face of the forks to the load's center of mass
- The distance between the two outer edges of the forks
Correct answer: The horizontal distance from the front face of the forks to the load's center of mass
Explanation: The load center is the horizontal distance from the vertical face of the forks (the backrest) to the center of gravity of the load. Standard ratings are usually based on a 24-inch (600mm) load center.
Start free practice for Forklift Operator Exam Prep
401 questions · no signup required · 40 free questions per day
More about Forklift Operator Exam Prep
Related Questions
- What is the primary purpose of conducting a daily pre-shift inspection of a forklift?
- During a pre-operational inspection, if an operator discovers a hydraulic fluid leak, what is the immediate ac
- When inspecting forklift tires, what is a critical sign of excessive wear that would necessitate replacement?
- What specific component of the mast should an operator carefully inspect for cracks, welds, and abnormal wear
- If a forklift's horn is not functioning during the pre-operation check, what is the appropriate next step?
- Before operating an electric forklift, why is it essential to check the battery's electrolyte levels and conne
More for Forklift Operator Exam Prep candidates
FAQs
Question explanations
- What is the primary purpose of conducting a daily pre-shift inspection of a forklift?
- During a pre-operational inspection, if an operator discovers a hydraulic fluid leak, what is the immediate ac
- When inspecting forklift tires, what is a critical sign of excessive wear that would necessitate replacement?
- What specific component of the mast should an operator carefully inspect for cracks, welds, and abnormal wear
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Forklift Operator Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.