Forklift Operator Exam Prep · Question
When travelling with a loaded forklift, what is the correct position for the forks?
To maintain stability and prevent the load from shifting or falling, forks should be tilted back and raised approximately 10-15 cm (4-6 inches) off the ground w
Start free practice for Forklift Operator Exam Prep
401 questions · no signup required · 40 free questions per day
Question: When travelling with a loaded forklift, what is the correct position for the forks?
Answer options:
- Elevated as high as possible for maximum visibility.
- Tilted fully forward to secure the load against the mast. ✅ Tilted slightly back and raised only enough to clear the ground and obstructions.
- Trailing behind the forklift to act as a counterweight.
Correct answer: Tilted slightly back and raised only enough to clear the ground and obstructions.
Explanation: To maintain stability and prevent the load from shifting or falling, forks should be tilted back and raised approximately 10-15 cm (4-6 inches) off the ground when travelling with a load, as per CSA B335 guidelines.
Start free practice for Forklift Operator Exam Prep
401 questions · no signup required · 40 free questions per day
More about Forklift Operator Exam Prep
Related Questions
- What is the primary purpose of conducting a daily pre-shift inspection of a forklift?
- During a pre-operational inspection, if an operator discovers a hydraulic fluid leak, what is the immediate ac
- When inspecting forklift tires, what is a critical sign of excessive wear that would necessitate replacement?
- What specific component of the mast should an operator carefully inspect for cracks, welds, and abnormal wear
- If a forklift's horn is not functioning during the pre-operation check, what is the appropriate next step?
- Before operating an electric forklift, why is it essential to check the battery's electrolyte levels and conne
More for Forklift Operator Exam Prep candidates
FAQs
Question explanations
- What is the primary purpose of conducting a daily pre-shift inspection of a forklift?
- During a pre-operational inspection, if an operator discovers a hydraulic fluid leak, what is the immediate ac
- When inspecting forklift tires, what is a critical sign of excessive wear that would necessitate replacement?
- What specific component of the mast should an operator carefully inspect for cracks, welds, and abnormal wear
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Forklift Operator Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.