Loader Operator Certification Exam Prep · Question
What is the primary objective of 'bench cutting' or 'trimming' the face of a stockpile during material extraction?
Bench cutting or trimming the stockpile face involves creating a series of horizontal steps or reducing its overall height. This practice is crucial for safety
Start free practice for Loader Operator Certification Exam Prep
355 questions · no signup required · 40 free questions per day
Question: What is the primary objective of 'bench cutting' or 'trimming' the face of a stockpile during material extraction?
Answer options:
- To make the stockpile appear more aesthetically pleasing.
- To prevent erosion from wind and rain. ✅ To reduce the height of the working face for safer digging and prevent material collapse.
- To increase the overall volume of material within the stockpile.
Correct answer: To reduce the height of the working face for safer digging and prevent material collapse.
Explanation: Bench cutting or trimming the stockpile face involves creating a series of horizontal steps or reducing its overall height. This practice is crucial for safety by lowering the potential for large volumes of material to collapse onto the loader, and it facilitates safer, more efficient digging operations. This aligns with good stockpile management and OHS practices related to ground stability.
Start free practice for Loader Operator Certification Exam Prep
355 questions · no signup required · 40 free questions per day
More about Loader Operator Certification Exam Prep
Related Questions
- An operator has just attached a new set of pallet forks using the machine's quick coupler. After initially tes
- A heavy-duty loader with articulating steering exhibits difficulty turning to the left, requiring significantl
- A loader operator observes that the hydraulic oil temperature gauge is consistently reading above the normal o
- A loader operator is preparing to load a 15-tonne wheel loader onto a lowboy trailer with a deck height of 0.9
- Which of the following is a primary safety concern when loading a large wheel loader onto a multi-axle float t
- An operator is securing a 20-tonne excavator on a float trailer. It has eight tie-down points. What is the min
More for Loader Operator Certification Exam Prep candidates
Question explanations
- An operator has just attached a new set of pallet forks using the machine's quick coupler. After initially tes
- A heavy-duty loader with articulating steering exhibits difficulty turning to the left, requiring significantl
- A loader operator observes that the hydraulic oil temperature gauge is consistently reading above the normal o
- A loader operator is preparing to load a 15-tonne wheel loader onto a lowboy trailer with a deck height of 0.9
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Loader Operator Certification Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.