An operator is attempting to place a 1500 kg roof truss onto a building. The load chart shows that at the required height of 9 m and a forward reach of 5 m, the telehandler has a capacity of 1800 kg. However, the telehandler is positioned on a slight incline (2 degrees), which is not factored into the standard load chart. What is the operator's primary concern in this situation?

Question: An operator is attempting to place a 1500 kg roof truss onto a building. The load chart shows that at the required height of 9 m and a forward reach of 5 m, the telehandler has a capacity of 1800 kg. However, the telehandler is positioned on a slight incline (2 degrees), which is not factored into the standard load chart. What is the operator's primary concern in this situation?

Answer options:

• The engine might overheat during the lift.
• The load will contact overhead power lines. ✅ The telehandler's stability will be compromised, potentially leading to tip-over.
• The hydraulic system may not generate enough pressure to lift the load.

Correct answer: The telehandler's stability will be compromised, potentially leading to tip-over.

Explanation: Operating a telehandler on an incline significantly reduces its stability and rated capacity, even if the load is within the chart's limits for level ground. The primary concern is the increased risk of tip-over due to the change in the machine's centre of gravity. Load charts are typically for firm, level ground.