When operating a telehandler on a sloped construction site in British Columbia, the operator must prioritize stability. What is the maximum angle of slope (in degrees) a telehandler can safely traverse with its boom retracted and forks pointed uphill, without a manufacturer's specific rating, according to general safety guidelines and considering the machine's center of gravity?

Question: When operating a telehandler on a sloped construction site in British Columbia, the operator must prioritize stability. What is the maximum angle of slope (in degrees) a telehandler can safely traverse with its boom retracted and forks pointed uphill, without a manufacturer's specific rating, according to general safety guidelines and considering the machine's center of gravity?

Answer options: ✅ Typically no more than 5 degrees for most models without special features.

• Up to 10 degrees if the load is stable and within capacity.
• As much as 15 degrees, provided the ground is firm.
• The machine's inclinometer reading, regardless of angle, is the only factor.

Correct answer: Typically no more than 5 degrees for most models without special features.

Explanation: CSA B354.7 and general safety guidelines emphasize that telehandlers have limitations on slopes. Without specific manufacturer's ratings for steeper angles, a conservative approach of no more than 5 degrees (approximately 9% grade) is often recommended to maintain stability, especially when travelling.