Telehandler Operator Certification Exam Prep · Question
While checking the forks of a telehandler, an operator notices that one fork blade is worn down by 11% of its original thickness. According to CSA B354.6, what action is necessary?
CSA B354.6 specifies that a fork shall be removed from service if the thickness of the blade has been reduced by 10% from its original thickness at any point. A
Start free practice for Telehandler Operator Certification Exam Prep
270 questions · no signup required · 40 free questions per day
Question: While checking the forks of a telehandler, an operator notices that one fork blade is worn down by 11% of its original thickness. According to CSA B354.6, what action is necessary?
Answer options: ✅ The fork must be removed from service and replaced.
- The fork can remain in service but should only lift 90% of its rated capacity.
- Schedule a professional inspection for welding repair.
- The fork can continue to be used but requires daily monitoring for cracks.
Correct answer: The fork must be removed from service and replaced.
Explanation: CSA B354.6 specifies that a fork shall be removed from service if the thickness of the blade has been reduced by 10% from its original thickness at any point. An 11% reduction means the fork no longer meets safety standards and must be replaced to prevent catastrophic failure under load.
Start free practice for Telehandler Operator Certification Exam Prep
270 questions · no signup required · 40 free questions per day
More about Telehandler Operator Certification Exam Prep
Related Questions
- A telehandler operator is about to begin their shift on a construction site and notices that the red service t
- When operating a telehandler, an operator notices an unusual vibration and loud grinding noise coming from the
- A telehandler operator is about to begin their shift on a construction site. Before mounting the telehandler,
- While operating a telehandler on a busy industrial site, an operator notices a 'restricted access' sign for a
- An operator is preparing to lift personnel using a telehandler with an approved work platform. What is the min
- A telehandler operator is repositioning the boom with workers in a platform. The workers alert the operator th
More for Telehandler Operator Certification Exam Prep candidates
Question explanations
- A telehandler operator is about to begin their shift on a construction site and notices that the red service t
- When operating a telehandler, an operator notices an unusual vibration and loud grinding noise coming from the
- A telehandler operator is about to begin their shift on a construction site. Before mounting the telehandler,
- While operating a telehandler on a busy industrial site, an operator notices a 'restricted access' sign for a
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Telehandler Operator Certification Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.