Telehandler Operator Certification Exam Prep · Question
An operator finds a crack extending 20 mm from the heel of a telehandler fork during the pre-shift inspection. What is the required action?
Any visible crack in a fork is a critical defect that compromises the structural integrity and safety. According to CSA B354.6 and provincial OHS regulations, c
Start free practice for Telehandler Operator Certification Exam Prep
270 questions · no signup required · 40 free questions per day
Question: An operator finds a crack extending 20 mm from the heel of a telehandler fork during the pre-shift inspection. What is the required action?
Answer options: ✅ The fork must be removed immediately and replaced, as cracks compromise structural integrity.
- The crack should be ground down and then welded by a certified welder.
- The fork can still be used, but the load capacity must be reduced by 50%.
- Monitor the crack daily to see if it propagates further before taking action.
Correct answer: The fork must be removed immediately and replaced, as cracks compromise structural integrity.
Explanation: Any visible crack in a fork is a critical defect that compromises the structural integrity and safety. According to CSA B354.6 and provincial OHS regulations, cracked forks are unsafe and must be immediately removed from service and replaced to prevent catastrophic failure and serious injury.
Start free practice for Telehandler Operator Certification Exam Prep
270 questions · no signup required · 40 free questions per day
More about Telehandler Operator Certification Exam Prep
Related Questions
- A telehandler operator is about to begin their shift on a construction site and notices that the red service t
- When operating a telehandler, an operator notices an unusual vibration and loud grinding noise coming from the
- A telehandler operator is about to begin their shift on a construction site. Before mounting the telehandler,
- While operating a telehandler on a busy industrial site, an operator notices a 'restricted access' sign for a
- An operator is preparing to lift personnel using a telehandler with an approved work platform. What is the min
- A telehandler operator is repositioning the boom with workers in a platform. The workers alert the operator th
More for Telehandler Operator Certification Exam Prep candidates
Question explanations
- A telehandler operator is about to begin their shift on a construction site and notices that the red service t
- When operating a telehandler, an operator notices an unusual vibration and loud grinding noise coming from the
- A telehandler operator is about to begin their shift on a construction site. Before mounting the telehandler,
- While operating a telehandler on a busy industrial site, an operator notices a 'restricted access' sign for a
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Telehandler Operator Certification Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.