An operator is preparing to lift a 2,000 kg pallet of rebar. The telehandler's load chart states a 'Maximum Lift Height' of 12 m and a 'Maximum Forward Reach' of 8 m. For the desired lift, the boom angle is at 30 degrees, and the radius from the front tyres to the load's centre of gravity is 7 m. In this configuration, the chart shows a capacity of 1,800 kg. What action must the operator take?

Question: An operator is preparing to lift a 2,000 kg pallet of rebar. The telehandler's load chart states a 'Maximum Lift Height' of 12 m and a 'Maximum Forward Reach' of 8 m. For the desired lift, the boom angle is at 30 degrees, and the radius from the front tyres to the load's centre of gravity is 7 m. In this configuration, the chart shows a capacity of 1,800 kg. What action must the operator take?

Answer options:

• Proceed with the lift as the load is within the telehandler's overall capabilities.
• Increase the boom angle to reduce the load radius, if possible, then re-check the chart.
• Decrease the boom angle to achieve greater reach and stability. ✅ Request a lighter pallet or use a telehandler with a higher capacity for that radius.

Correct answer: Request a lighter pallet or use a telehandler with a higher capacity for that radius.

Explanation: The telehandler's capacity at the given boom angle and radius (7 m) is only 1,800 kg, which is less than the 2,000 kg load. The operator must not proceed with the lift and must either reduce the load's weight or use a more capable machine to comply with CSA B354.7.