A telehandler is required to travel from a level concrete pad onto a gravel approach ramp with a 10-degree incline (approx. 17.6% grade). The load is a pre-fabricated wall section weighing 3,500 kg, and the telehandler's load chart indicates a maximum capacity of 4,000 kg on level ground at the required boom extension. What is the primary concern when transitioning onto the ramp?

Question: A telehandler is required to travel from a level concrete pad onto a gravel approach ramp with a 10-degree incline (approx. 17.6% grade). The load is a pre-fabricated wall section weighing 3,500 kg, and the telehandler's load chart indicates a maximum capacity of 4,000 kg on level ground at the required boom extension. What is the primary concern when transitioning onto the ramp?

Answer options: ✅ Reduced traction and stability due to the incline and surface change, potentially exceeding reduced capacity.

• Increased tire wear on the gravel surface.
• The need to engage four-wheel drive immediately.
• The load may shift on the forks if not secured.

Correct answer: Reduced traction and stability due to the incline and surface change, potentially exceeding reduced capacity.

Explanation: The primary concern is the significant reduction in stability and rated capacity when transitioning from a level, firm surface to an incline, especially with gravel presenting traction challenges, as mandated by CSA B354.6.