A telehandler has a maximum rated capacity of 4,000 kg with forks at a 600 mm load centre. An operator needs to lift a 2,000 kg load using a dedicated truss boom attachment. The load chart for this specific truss boom, at the required 4-metre horizontal reach and 6-metre height, shows a capacity of 1,750 kg. What must the operator do?

Question: A telehandler has a maximum rated capacity of 4,000 kg with forks at a 600 mm load centre. An operator needs to lift a 2,000 kg load using a dedicated truss boom attachment. The load chart for this specific truss boom, at the required 4-metre horizontal reach and 6-metre height, shows a capacity of 1,750 kg. What must the operator do?

Answer options:

• Proceed with the lift carefully, as the overall telehandler capacity is much higher.
• Reduce the boom extension to decrease the horizontal reach until the load chart capacity is at least 2,000 kg.
• Confirm that the truss boom attachment is properly secured to the telehandler. ✅ Obtain a larger telehandler or re-plan the lift with a lighter load.

Correct answer: Obtain a larger telehandler or re-plan the lift with a lighter load.

Explanation: The operator must never exceed the stated capacity on the load chart for the specific attachment being used and its configuration. The 1,750 kg capacity for the truss boom at the required reach is less than the 2,000 kg load. Therefore, a larger telehandler is required, or the load must be reduced. Just reducing extension may not be enough, and securing the boom doesn't address the capacity issue.