Welder Red Seal · Question
A welder is preparing to weld two pieces of 10 mm thick carbon steel (CSA G40.21 300W) using the Shielded Metal Arc Welding (SMAW) process. The application is for a structural connection requiring good impact toughness at room temperature. Which electrode classification would be most suitable?
E7018 electrodes are low-hydrogen electrodes known for producing welds with excellent mechanical properties, including good impact toughness and ductility, maki
Start free practice for Welder Red Seal
154 questions · no signup required · 40 free questions per day
Question: A welder is preparing to weld two pieces of 10 mm thick carbon steel (CSA G40.21 300W) using the Shielded Metal Arc Welding (SMAW) process. The application is for a structural connection requiring good impact toughness at room temperature. Which electrode classification would be most suitable?
Answer options:
- E6010 ✅ E7018
- E6013
- E7024
Correct answer: E7018
Explanation: E7018 electrodes are low-hydrogen electrodes known for producing welds with excellent mechanical properties, including good impact toughness and ductility, making them ideal for structural applications where integrity is critical. E6010 offers deep penetration but less toughness, E6013 is general-purpose with less strength and toughness, and E7024 is for high deposition rates in flat/horizontal positions but not typically selected for critical impact toughness.
Start free practice for Welder Red Seal
154 questions · no signup required · 40 free questions per day
More about Welder Red Seal
Related Questions
- A welder is fabricating a pressure vessel component using FCAW-G with an E70T-1 wire. The procedure specifies
- A welder is preparing to weld 20 mm (0.8 in) thick high-strength low-alloy (HSLA) steel using FCAW-G. The weld
- A structural steel fabricator is using FCAW-S (E71T-8 wire) to weld heavy sections of structural steel in an o
- When performing FCAW-G (gas-shielded flux-cored arc welding), a welder notices the arc is unstable and the wir
- A structural welder is performing overhead FCAW-G on 12 mm (0.5 in) thick steel with an E71T-1 wire. The weld
- A welder is setting up an FCAW-S machine for welding in a remote location without access to external shielding
More for Welder Red Seal candidates
Practice tests
Question explanations
- A welder is fabricating a pressure vessel component using FCAW-G with an E70T-1 wire. The procedure specifies
- A welder is preparing to weld 20 mm (0.8 in) thick high-strength low-alloy (HSLA) steel using FCAW-G. The weld
- A structural steel fabricator is using FCAW-S (E71T-8 wire) to weld heavy sections of structural steel in an o
- When performing FCAW-G (gas-shielded flux-cored arc welding), a welder notices the arc is unstable and the wir
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Welder Red Seal Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.