Welder Red Seal · Question
On a blueprint, a fillet weld symbol is shown with '3/8' to its left and '3-5' to its right. What does the '3-5' dimension represent?
For an intermittent fillet weld, the dimensions to the right of the symbol denote the length of each weld segment (3 inches) and the pitch, which is the center-
Start free practice for Welder Red Seal
154 questions · no signup required · 40 free questions per day
Question: On a blueprint, a fillet weld symbol is shown with '3/8' to its left and '3-5' to its right. What does the '3-5' dimension represent?
Answer options:
- The root opening is 3mm and the groove angle is 5 degrees ✅ The weld length is 3 inches and the pitch (center-to-center spacing) is 5 inches
- The weld should be made in 3 to 5 passes
- The effective throat is 3mm and the leg size is 5mm
Correct answer: The weld length is 3 inches and the pitch (center-to-center spacing) is 5 inches
Explanation: For an intermittent fillet weld, the dimensions to the right of the symbol denote the length of each weld segment (3 inches) and the pitch, which is the center-to-center distance between segments (5 inches).
Start free practice for Welder Red Seal
154 questions · no signup required · 40 free questions per day
More about Welder Red Seal
Related Questions
- A welder is fabricating a pressure vessel component using FCAW-G with an E70T-1 wire. The procedure specifies
- A welder is preparing to weld 20 mm (0.8 in) thick high-strength low-alloy (HSLA) steel using FCAW-G. The weld
- A structural steel fabricator is using FCAW-S (E71T-8 wire) to weld heavy sections of structural steel in an o
- When performing FCAW-G (gas-shielded flux-cored arc welding), a welder notices the arc is unstable and the wir
- A structural welder is performing overhead FCAW-G on 12 mm (0.5 in) thick steel with an E71T-1 wire. The weld
- A welder is setting up an FCAW-S machine for welding in a remote location without access to external shielding
More for Welder Red Seal candidates
Practice tests
Question explanations
- A welder is fabricating a pressure vessel component using FCAW-G with an E70T-1 wire. The procedure specifies
- A welder is preparing to weld 20 mm (0.8 in) thick high-strength low-alloy (HSLA) steel using FCAW-G. The weld
- A structural steel fabricator is using FCAW-S (E71T-8 wire) to weld heavy sections of structural steel in an o
- When performing FCAW-G (gas-shielded flux-cored arc welding), a welder notices the arc is unstable and the wir
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Welder Red Seal Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.