Welder Red Seal · Question
A drawing shows an assembly composed of several parts. One part is labelled 'PART A - QTY 4', another 'PART B - QTY 2' and 'PART C - QTY 1'. On the bill of materials (BOM), each part also has a Material Specification (e.g., SA-36, ASTM A53 Gr. B). What is the primary purpose of the 'QTY' designation on the drawing and in the BOM?
QTY, standing for 'quantity', specifies how many units of a particular part are needed for a single complete assembly. This is crucial for material procurement
Start free practice for Welder Red Seal
154 questions · no signup required · 40 free questions per day
Question: A drawing shows an assembly composed of several parts. One part is labelled 'PART A - QTY 4', another 'PART B - QTY 2' and 'PART C - QTY 1'. On the bill of materials (BOM), each part also has a Material Specification (e.g., SA-36, ASTM A53 Gr. B). What is the primary purpose of the 'QTY' designation on the drawing and in the BOM?
Answer options:
- It indicates the relative size of each part.
- It specifies the maximum allowed number of defects for that part. ✅ It denotes the quantity of each specific part required to complete one assembly.
- It represents the number of sub-components within each main part.
Correct answer: It denotes the quantity of each specific part required to complete one assembly.
Explanation: QTY, standing for 'quantity', specifies how many units of a particular part are needed for a single complete assembly. This is crucial for material procurement and assembly planning. It has no relation to size, defects, or sub-components.
Start free practice for Welder Red Seal
154 questions · no signup required · 40 free questions per day
More about Welder Red Seal
Related Questions
- A welder is fabricating a pressure vessel component using FCAW-G with an E70T-1 wire. The procedure specifies
- A welder is preparing to weld 20 mm (0.8 in) thick high-strength low-alloy (HSLA) steel using FCAW-G. The weld
- A structural steel fabricator is using FCAW-S (E71T-8 wire) to weld heavy sections of structural steel in an o
- When performing FCAW-G (gas-shielded flux-cored arc welding), a welder notices the arc is unstable and the wir
- A structural welder is performing overhead FCAW-G on 12 mm (0.5 in) thick steel with an E71T-1 wire. The weld
- A welder is setting up an FCAW-S machine for welding in a remote location without access to external shielding
More for Welder Red Seal candidates
Practice tests
Question explanations
- A welder is fabricating a pressure vessel component using FCAW-G with an E70T-1 wire. The procedure specifies
- A welder is preparing to weld 20 mm (0.8 in) thick high-strength low-alloy (HSLA) steel using FCAW-G. The weld
- A structural steel fabricator is using FCAW-S (E71T-8 wire) to weld heavy sections of structural steel in an o
- When performing FCAW-G (gas-shielded flux-cored arc welding), a welder notices the arc is unstable and the wir
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Welder Red Seal Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.