Carpenter Red Seal Exam Prep · Question
During the installation of pre-fabricated roof trusses on a residential project, the carpenter notices that some web members have minor damage (small, splintered areas) from shipping. The structural engineer is not immediately available for consultation. What is the most appropriate action?
Any damage to pre-fabricated trusses, including minor damage to web members, can compromise their structural integrity. It is crucial to have them assessed by a
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
Question: During the installation of pre-fabricated roof trusses on a residential project, the carpenter notices that some web members have minor damage (small, splintered areas) from shipping. The structural engineer is not immediately available for consultation. What is the most appropriate action?
Answer options:
- Proceed with installation, as minor damage to web members is usually cosmetic.
- Trim off the splintered areas and reinforce with plywood gussets. ✅ Set aside the damaged trusses and contact the truss manufacturer and/or structural engineer for assessment and repair instructions.
- Use wood glue to repair the splintered areas and clamp until dry.
Correct answer: Set aside the damaged trusses and contact the truss manufacturer and/or structural engineer for assessment and repair instructions.
Explanation: Any damage to pre-fabricated trusses, including minor damage to web members, can compromise their structural integrity. It is crucial to have them assessed by a qualified person (manufacturer or engineer) to determine if they can be repaired or must be replaced. Proceeding with installation or attempting unauthorized repairs could lead to structural failure.
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
More about Carpenter Red Seal Exam Prep
Related Questions
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
- What is the primary purpose of string lines and batter boards when laying out a foundation?
- According to typical blueprint conventions, a heavily dashed line (longer dashes) often represents an item tha
More for Carpenter Red Seal Exam Prep candidates
Practice tests
Question explanations
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Carpenter Red Seal Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.