Carpenter Red Seal Exam Prep · Question
During the erection of falsework, BC WCB Section 8.7.2 requires that falsework be adequately braced. What is considered 'adequate' in terms of bracing for vertical supports on the same level?
BC WCB Section 8.7.2 states that 'falsework and formwork for concrete construction must be adequately braced, and vertical supports must be braced in at least t
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
Question: During the erection of falsework, BC WCB Section 8.7.2 requires that falsework be adequately braced. What is considered 'adequate' in terms of bracing for vertical supports on the same level?
Answer options:
- Braced at every 2.0 m of height. ✅ Braced in at least two directions at heights exceeding 2.4 m.
- Braced diagonally at 3.0 m centres horizontally.
- Only braced if the height exceeds 5.0 m.
Correct answer: Braced in at least two directions at heights exceeding 2.4 m.
Explanation: BC WCB Section 8.7.2 states that 'falsework and formwork for concrete construction must be adequately braced, and vertical supports must be braced in at least two directions at heights exceeding 2.4 m (8 ft.)'. This ensures stability against lateral forces.
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
More about Carpenter Red Seal Exam Prep
Related Questions
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
- What is the primary purpose of string lines and batter boards when laying out a foundation?
- According to typical blueprint conventions, a heavily dashed line (longer dashes) often represents an item tha
More for Carpenter Red Seal Exam Prep candidates
Practice tests
Question explanations
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Carpenter Red Seal Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.