Carpenter Red Seal Exam Prep · Question
According to the Alberta OHS Code, Section 287(2), what is the minimum requirement for bracing or shoring designed to support formwork for concrete placement?
The Alberta OHS Code, Section 287(2), specifies that bracing or shoring for formwork must be designed and inspected by a professional engineer to ensure its str
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
Question: According to the Alberta OHS Code, Section 287(2), what is the minimum requirement for bracing or shoring designed to support formwork for concrete placement?
Answer options:
- It must be designed by a competent worker.
- It must be inspected hourly during concrete placement. ✅ It must be designed and inspected by a professional engineer.
- It must be capable of supporting only the dead load of concrete.
Correct answer: It must be designed and inspected by a professional engineer.
Explanation: The Alberta OHS Code, Section 287(2), specifies that bracing or shoring for formwork must be designed and inspected by a professional engineer to ensure its structural integrity and safety. This provision ensures that complex temporary structures, which carry significant loads and present high risks, are handled by qualified professionals.
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
More about Carpenter Red Seal Exam Prep
Related Questions
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
- What is the primary purpose of string lines and batter boards when laying out a foundation?
- According to typical blueprint conventions, a heavily dashed line (longer dashes) often represents an item tha
More for Carpenter Red Seal Exam Prep candidates
Practice tests
Question explanations
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Carpenter Red Seal Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.