Carpenter Red Seal Exam Prep · Question
When attaching gypsum board vertically to wall studs, what is the maximum recommended on-centre spacing for 38 mm x 89 mm (2x4) studs to adequately support the gypsum board and finish materials?
To properly support gypsum board and prevent cracking or sagging, studs are typically spaced at a maximum of 600 mm on centre when applying gypsum board vertica
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
Question: When attaching gypsum board vertically to wall studs, what is the maximum recommended on-centre spacing for 38 mm x 89 mm (2x4) studs to adequately support the gypsum board and finish materials?
Answer options: ✅ 600 mm on centre
- 400 mm on centre
- 450 mm on centre
- 500 mm on centre
Correct answer: 600 mm on centre
Explanation: To properly support gypsum board and prevent cracking or sagging, studs are typically spaced at a maximum of 600 mm on centre when applying gypsum board vertically. This aligns with standard construction practices.
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
More about Carpenter Red Seal Exam Prep
Related Questions
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
- What is the primary purpose of string lines and batter boards when laying out a foundation?
- According to typical blueprint conventions, a heavily dashed line (longer dashes) often represents an item tha
More for Carpenter Red Seal Exam Prep candidates
Practice tests
Question explanations
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Carpenter Red Seal Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.