Carpenter Red Seal Exam Prep · Question
What is the purpose of cambering a beam?
Cambering involves giving a beam a slight upward curve. This is done so that when the beam is subjected to its design load, it will deflect down to a level posi
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
Question: What is the purpose of cambering a beam?
Answer options: ✅ To offset anticipated deflection under load, resulting in a level beam when fully loaded.
- To increase the beam's resistance to twisting.
- To make installation easier in tight spaces.
- To reduce the overall weight of the beam.
Correct answer: To offset anticipated deflection under load, resulting in a level beam when fully loaded.
Explanation: Cambering involves giving a beam a slight upward curve. This is done so that when the beam is subjected to its design load, it will deflect down to a level position, appearing straight and preventing a sagging appearance.
Start free practice for Carpenter Red Seal Exam Prep
300 questions · no signup required · 40 free questions per day
More about Carpenter Red Seal Exam Prep
Related Questions
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
- What is the primary purpose of string lines and batter boards when laying out a foundation?
- According to typical blueprint conventions, a heavily dashed line (longer dashes) often represents an item tha
More for Carpenter Red Seal Exam Prep candidates
Practice tests
Question explanations
- When interpreting a foundation plan, a dashed line with 'P. WALL' typically represents which of the following?
- A site plan shows contour lines with an interval of 0.5 m. If two adjacent contour lines are labelled 124.0 m
- According to the National Building Code of Canada (NBC) 2020, what is the primary consideration for the requir
- Two offset stakes are driven at 2.0 m from the proposed edge of a concrete slab. The first stake is marked 'Cu
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Carpenter Red Seal Exam Prep Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.