CFAA Fire Alarm Technician · Question
What is a key requirement during the Verification (S537) of a remote annunciator?
Standard procedure involves testing and verifying that the annunciator exactly matches the site plan and the actual zone of the alarm. Improper zoning is a fail
Start free practice for CFAA Fire Alarm Technician
30 questions · no signup required · 40 free questions per day
Question: What is a key requirement during the Verification (S537) of a remote annunciator?
Answer options:
- Confirming that the LEDs are bright enough to see in daylight
- Verifying that the annunciator is red in color ✅ Verifying that each zone or device indicated on the annunciator correctly matches its physical location in the building
- Testing the annunciator using only the 'Lamp Test' button
Correct answer: Verifying that each zone or device indicated on the annunciator correctly matches its physical location in the building
Explanation: Standard procedure involves testing and verifying that the annunciator exactly matches the site plan and the actual zone of the alarm. Improper zoning is a failure during verification.
Start free practice for CFAA Fire Alarm Technician
30 questions · no signup required · 40 free questions per day
More about CFAA Fire Alarm Technician
Related Questions
- The primary power for a fire alarm system must be:
- If a 120VAC primary power circuit for a fire alarm control unit is consuming 60 Watts of power, what is the cu
- In a steady-state DC circuit, if the conductor length is doubled while maintaining voltage and wire gauge, wha
- A resistor is rated at 10 Watts at 24VDC. If the voltage drops to 20VDC, what is the new power dissipation?
- A circuit has a total resistance of 40 Ohms and is connected to a 24VDC source. What is the total power dissip
- Which of the following is NOT a direct component of Ohm's Law?
More for CFAA Fire Alarm Technician candidates
Study guides
FAQs
- How long is the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- How many questions are on the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- What is the passing score for the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- How often do I need to recertify CFAA Fire Alarm Technician? — CFAA Fire Alarm Technician
Question explanations
- The primary power for a fire alarm system must be:
- If a 120VAC primary power circuit for a fire alarm control unit is consuming 60 Watts of power, what is the cu
- In a steady-state DC circuit, if the conductor length is doubled while maintaining voltage and wire gauge, wha
- A resistor is rated at 10 Watts at 24VDC. If the voltage drops to 20VDC, what is the new power dissipation?
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free CFAA Fire Alarm Technician Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.