CFAA Fire Alarm Technician · Question
A manual pull station is being installed in a school. Which height to the center of the manual station is compliant?
Clause 5.2.1.1 is specific for manual stations. The intention is to align with NBC and accessibility standards, ensuring the pull lever is between 900mm and 155
Start free practice for CFAA Fire Alarm Technician
30 questions · no signup required · 40 free questions per day
Question: A manual pull station is being installed in a school. Which height to the center of the manual station is compliant?
Answer options:
- 800 mm
- 1650 mm ✅ 1200 mm
- 2000 mm 1000mm
Correct answer: 1200 mm
Explanation: Clause 5.2.1.1 is specific for manual stations. The intention is to align with NBC and accessibility standards, ensuring the pull lever is between 900mm and 1550mm. 1200mm is the common 'ideal' height.
Start free practice for CFAA Fire Alarm Technician
30 questions · no signup required · 40 free questions per day
More about CFAA Fire Alarm Technician
Related Questions
- The primary power for a fire alarm system must be:
- If a 120VAC primary power circuit for a fire alarm control unit is consuming 60 Watts of power, what is the cu
- In a steady-state DC circuit, if the conductor length is doubled while maintaining voltage and wire gauge, wha
- A resistor is rated at 10 Watts at 24VDC. If the voltage drops to 20VDC, what is the new power dissipation?
- A circuit has a total resistance of 40 Ohms and is connected to a 24VDC source. What is the total power dissip
- Which of the following is NOT a direct component of Ohm's Law?
More for CFAA Fire Alarm Technician candidates
Study guides
FAQs
- How long is the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- How many questions are on the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- What is the passing score for the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- How often do I need to recertify CFAA Fire Alarm Technician? — CFAA Fire Alarm Technician
Question explanations
- The primary power for a fire alarm system must be:
- If a 120VAC primary power circuit for a fire alarm control unit is consuming 60 Watts of power, what is the cu
- In a steady-state DC circuit, if the conductor length is doubled while maintaining voltage and wire gauge, wha
- A resistor is rated at 10 Watts at 24VDC. If the voltage drops to 20VDC, what is the new power dissipation?
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free CFAA Fire Alarm Technician Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.