CFAA Fire Alarm Technician · Question
Per Canadian S536 standards (which parallel NFPA 72 testing frequencies), how often must all heat detectors be tested?
Under S536 (Inspection), heat detectors can be tested with a heat source. NFPA 72 provides similar guidance, but the ULC standard specifies the rate of rise or
Start free practice for CFAA Fire Alarm Technician
30 questions · no signup required · 40 free questions per day
Question: Per Canadian S536 standards (which parallel NFPA 72 testing frequencies), how often must all heat detectors be tested?
Answer options: ✅ Every year (100%)
- Only once every two years (50%)
- Only when the building is sold
- Only if the system is addressable
Correct answer: Every year (100%)
Explanation: Under S536 (Inspection), heat detectors can be tested with a heat source. NFPA 72 provides similar guidance, but the ULC standard specifies the rate of rise or fixed temp application.
Start free practice for CFAA Fire Alarm Technician
30 questions · no signup required · 40 free questions per day
More about CFAA Fire Alarm Technician
Related Questions
- The primary power for a fire alarm system must be:
- If a 120VAC primary power circuit for a fire alarm control unit is consuming 60 Watts of power, what is the cu
- In a steady-state DC circuit, if the conductor length is doubled while maintaining voltage and wire gauge, wha
- A resistor is rated at 10 Watts at 24VDC. If the voltage drops to 20VDC, what is the new power dissipation?
- A circuit has a total resistance of 40 Ohms and is connected to a 24VDC source. What is the total power dissip
- Which of the following is NOT a direct component of Ohm's Law?
More for CFAA Fire Alarm Technician candidates
Study guides
FAQs
- How long is the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- How many questions are on the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- What is the passing score for the CFAA Fire Alarm Technician exam? — CFAA Fire Alarm Technician
- How often do I need to recertify CFAA Fire Alarm Technician? — CFAA Fire Alarm Technician
Question explanations
- The primary power for a fire alarm system must be:
- If a 120VAC primary power circuit for a fire alarm control unit is consuming 60 Watts of power, what is the cu
- In a steady-state DC circuit, if the conductor length is doubled while maintaining voltage and wire gauge, wha
- A resistor is rated at 10 Watts at 24VDC. If the voltage drops to 20VDC, what is the new power dissipation?
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free CFAA Fire Alarm Technician Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.