Refrigeration & Air Conditioning Mechanic Red Seal · Question
What is the purpose of conducting a vacuum test on a newly installed refrigeration system?
Pulling a deep vacuum removes air (non-condensables) and moisture, which can cause chemical reactions and system damage, from the refrigerant circuit.
Start free practice for Refrigeration & Air Conditioning Mechanic Red Seal
500 questions · no signup required · 40 free questions per day
Question: What is the purpose of conducting a vacuum test on a newly installed refrigeration system?
Answer options: ✅ To remove non-condensable gases and moisture from the system.
- To verify that the system has proper refrigerant charge.
- To measure the oil level in the compressor crankcase.
- To check for proper electrical continuity in the wiring.
Correct answer: To remove non-condensable gases and moisture from the system.
Explanation: Pulling a deep vacuum removes air (non-condensables) and moisture, which can cause chemical reactions and system damage, from the refrigerant circuit.
Start free practice for Refrigeration & Air Conditioning Mechanic Red Seal
500 questions · no signup required · 40 free questions per day
More about Refrigeration & Air Conditioning Mechanic Red Seal
Related Questions
- Which of the following refrigerants is a hydrofluorocarbon (HFC) and has a high ozone depletion potential (ODP
- Which component is responsible for compressing the refrigerant vapour to a high pressure and temperature?
- According to the Canadian Electrical Code (CEC), what is the minimum required working clearance in front of el
- What is the main operating characteristic difference between a fixed orifice (capillary tube) and a Thermostat
- Which type of electric motor requires a capacitor for starting and running, offering higher efficiency and bet
- When evacuating a refrigeration system, what is the recommended deep vacuum level, typically measured in micro
More for Refrigeration & Air Conditioning Mechanic Red Seal candidates
FAQs
Question explanations
- Which of the following refrigerants is a hydrofluorocarbon (HFC) and has a high ozone depletion potential (ODP
- Which component is responsible for compressing the refrigerant vapour to a high pressure and temperature?
- According to the Canadian Electrical Code (CEC), what is the minimum required working clearance in front of el
- What is the main operating characteristic difference between a fixed orifice (capillary tube) and a Thermostat
Ready to practice?
Free, no signup required. Build a wrong-question list as you go.
Start Free Refrigeration & Air Conditioning Mechanic Red Seal Practice →Related courses
Other Canadian certifications candidates often prepare for alongside this one.